DIY Fidget Spinner – Must Check
I am going to teach you how you can create DIY fidget spinner.
The stuff you are going to need for creating this fidget spinner is
The chain you can find easily of your old bicycle
You can even ask your local bike store if you do not have one and you might going to get one for free.
You can also use a manual brush if the chain is rusty.
Put other zip tie from the other end and make it look like this.
Put the other one from the other end
Now put the end on the other side and make it look like this for making this DIY fidget spinner.
Tight it a bit more and cut the ends
Take your bearing and put it inside the chain.
Now pull it tight and cut the corners. And now this DIY fidget spinner is ready can you imagine how easy it is.
If you want it even secure you can glue it too so the bearing doesnt pops out.
The spinning time of this DIY Spinner is 2:04 minutes.
Hope you enjoy it and share your images if you create one.
You should also visit this page if you want to see how you can create DIY 3D fidget spinner.
Another 3D fidget spinner created with 3D Printer